A
-
A356 Aluminum alloy
Manufacturing A356 Aluminum Alloy/Hexagonal Boron Nitride Composite and Evaluation of its Mechanical Properties [Volume 24, Issue 2, 2012-2013]
-
Alumina-based cermets
Effects of Fabrication Parameters on Phase Composition, Densification and Mechanical Properties of Aluminum-Alumina Cermets [Volume 24, Issue 1, 2012-2013]
-
Aluminum
Effects of Fabrication Parameters on Phase Composition, Densification and Mechanical Properties of Aluminum-Alumina Cermets [Volume 24, Issue 1, 2012-2013]
-
Amorphous
An Investigation into the Effects of Controlling Parameters on Amorphous-Nanocrystalline Ni-P Coating using Taguchi Method and Evaluation of its Thermal Behaviour [Volume 24, Issue 2, 2012-2013]
-
Amorphous alloy
A Research on Surface Oxidation of Co67Fe4Cr7Si8B14 Amorphous Ribbon during Crystallization [Volume 24, Issue 2, 2012-2013]
-
AZ 31 Magnesium Alloy
Optimization of the Processing Parameters of Pulsed TIG Welding for the Enhancement of Mechanical Properties of Welds in AZ31 Magnesium Alloy [Volume 24, Issue 1, 2012-2013]
B
-
Bending Strength
The Effect of Fe2O3 on Microstructure and Mechanical Properties of Foam Glass Obtained from Soda-Lime Waste Glass and SiC as Foaming Agent [Volume 24, Issue 1, 2012-2013]
-
Bifurcation criterion
Numerical Evaluation of the Effect of Forming Velocity on Forming Limit Diagram (FLD) of St14 Steel using Bifurcation Theory and Comparison with Experimental Results [Volume 24, Issue 1, 2012-2013]
-
Boron Nitride
Manufacturing A356 Aluminum Alloy/Hexagonal Boron Nitride Composite and Evaluation of its Mechanical Properties [Volume 24, Issue 2, 2012-2013]
C
-
Calcium Aluminate
Desulfurization of Plain Carbon Steel by CaO-Al2O3-SiO2 and CaO-Al2O3-SiO2-X (X = Na2O, SrO) Synthetic Slags [Volume 24, Issue 2, 2012-2013]
-
Cation Exchange Resin
Control of Particle Size and Concentration of Colloidal Silica Formed via Cation Exchange Resin by Water Glass Solution [Volume 24, Issue 2, 2012-2013]
-
Co67Fe4Cr7Si8B14
A Research on Surface Oxidation of Co67Fe4Cr7Si8B14 Amorphous Ribbon during Crystallization [Volume 24, Issue 2, 2012-2013]
-
Colloidal Silica
Control of Particle Size and Concentration of Colloidal Silica Formed via Cation Exchange Resin by Water Glass Solution [Volume 24, Issue 2, 2012-2013]
-
Composite
Manufacturing A356 Aluminum Alloy/Hexagonal Boron Nitride Composite and Evaluation of its Mechanical Properties [Volume 24, Issue 2, 2012-2013]
-
Crystallization
A Research on Surface Oxidation of Co67Fe4Cr7Si8B14 Amorphous Ribbon during Crystallization [Volume 24, Issue 2, 2012-2013]
D
-
Dental Cement
Synthesis of the HA/YSZ Nanocomposite to Enhance GIC Fluoride Release [Volume 24, Issue 1, 2012-2013]
-
Design of Experiment
Study of Effective Parameters of Coating on Internal Pores in Cast Iron Parts Produced by Lost-Foam Casting [Volume 24, Issue 1, 2012-2013]
-
Desulfurization
Desulfurization of Plain Carbon Steel by CaO-Al2O3-SiO2 and CaO-Al2O3-SiO2-X (X = Na2O, SrO) Synthetic Slags [Volume 24, Issue 2, 2012-2013]
-
DSC method
An Investigation into the Effects of Controlling Parameters on Amorphous-Nanocrystalline Ni-P Coating using Taguchi Method and Evaluation of its Thermal Behaviour [Volume 24, Issue 2, 2012-2013]
E
-
Electrodeposition
An Investigation into the Effects of Controlling Parameters on Amorphous-Nanocrystalline Ni-P Coating using Taguchi Method and Evaluation of its Thermal Behaviour [Volume 24, Issue 2, 2012-2013]
F
-
Fluoride release
Synthesis of the HA/YSZ Nanocomposite to Enhance GIC Fluoride Release [Volume 24, Issue 1, 2012-2013]
-
Foam glass
The Effect of Fe2O3 on Microstructure and Mechanical Properties of Foam Glass Obtained from Soda-Lime Waste Glass and SiC as Foaming Agent [Volume 24, Issue 1, 2012-2013]
-
Foam Model
Study of Effective Parameters of Coating on Internal Pores in Cast Iron Parts Produced by Lost-Foam Casting [Volume 24, Issue 1, 2012-2013]
-
Forming limit diagram
Numerical Evaluation of the Effect of Forming Velocity on Forming Limit Diagram (FLD) of St14 Steel using Bifurcation Theory and Comparison with Experimental Results [Volume 24, Issue 1, 2012-2013]
-
Forming velocity
Numerical Evaluation of the Effect of Forming Velocity on Forming Limit Diagram (FLD) of St14 Steel using Bifurcation Theory and Comparison with Experimental Results [Volume 24, Issue 1, 2012-2013]
-
Fracture mechanismØ› Mechanical propertiesFracture mechanism
A Study of Mechanical Properties and Fracture Mechanisms of Powder Metallurgy Parts Prepared using Semi Pre-alloyed Steels [Volume 24, Issue 2, 2012-2013]
G
-
Glass-ceramic
Influence of Heat Treatment on Crystallization and Transparency of Glass-Ceramics Containing Lithium-Mica Nanocrystals [Volume 24, Issue 2, 2012-2013]
-
Glass ionomer
Synthesis of the HA/YSZ Nanocomposite to Enhance GIC Fluoride Release [Volume 24, Issue 1, 2012-2013]
-
Gray Cast Iron
Study of Effective Parameters of Coating on Internal Pores in Cast Iron Parts Produced by Lost-Foam Casting [Volume 24, Issue 1, 2012-2013]
H
-
Hematite (Fe2O3)
The Effect of Fe2O3 on Microstructure and Mechanical Properties of Foam Glass Obtained from Soda-Lime Waste Glass and SiC as Foaming Agent [Volume 24, Issue 1, 2012-2013]
I
-
Internal Pores
Study of Effective Parameters of Coating on Internal Pores in Cast Iron Parts Produced by Lost-Foam Casting [Volume 24, Issue 1, 2012-2013]
-
Isoth00ermal annealing
A Research on Surface Oxidation of Co67Fe4Cr7Si8B14 Amorphous Ribbon during Crystallization [Volume 24, Issue 2, 2012-2013]
L
-
Lithium-mica
Influence of Heat Treatment on Crystallization and Transparency of Glass-Ceramics Containing Lithium-Mica Nanocrystals [Volume 24, Issue 2, 2012-2013]
-
Lost-Foam Casting, Coating
Study of Effective Parameters of Coating on Internal Pores in Cast Iron Parts Produced by Lost-Foam Casting [Volume 24, Issue 1, 2012-2013]
M
-
Mechanical properties
Optimization of the Processing Parameters of Pulsed TIG Welding for the Enhancement of Mechanical Properties of Welds in AZ31 Magnesium Alloy [Volume 24, Issue 1, 2012-2013]
-
Mechanical properties
Effects of Fabrication Parameters on Phase Composition, Densification and Mechanical Properties of Aluminum-Alumina Cermets [Volume 24, Issue 1, 2012-2013]
-
Mechanical properties
A Study of Mechanical Properties and Fracture Mechanisms of Powder Metallurgy Parts Prepared using Semi Pre-alloyed Steels [Volume 24, Issue 2, 2012-2013]
-
Microstructure
The Effect of Fe2O3 on Microstructure and Mechanical Properties of Foam Glass Obtained from Soda-Lime Waste Glass and SiC as Foaming Agent [Volume 24, Issue 1, 2012-2013]
-
Microstructure
Effects of Fabrication Parameters on Phase Composition, Densification and Mechanical Properties of Aluminum-Alumina Cermets [Volume 24, Issue 1, 2012-2013]
-
Modeling
Study of Effective Parameters of Coating on Internal Pores in Cast Iron Parts Produced by Lost-Foam Casting [Volume 24, Issue 1, 2012-2013]
N
-
Nanocomposite
Synthesis of the HA/YSZ Nanocomposite to Enhance GIC Fluoride Release [Volume 24, Issue 1, 2012-2013]
-
Nanocrystal
Influence of Heat Treatment on Crystallization and Transparency of Glass-Ceramics Containing Lithium-Mica Nanocrystals [Volume 24, Issue 2, 2012-2013]
-
Ni-P alloy coating
An Investigation into the Effects of Controlling Parameters on Amorphous-Nanocrystalline Ni-P Coating using Taguchi Method and Evaluation of its Thermal Behaviour [Volume 24, Issue 2, 2012-2013]
-
Ni-P Electroless
Manufacturing A356 Aluminum Alloy/Hexagonal Boron Nitride Composite and Evaluation of its Mechanical Properties [Volume 24, Issue 2, 2012-2013]
O
-
Optimization
Study of Effective Parameters of Coating on Internal Pores in Cast Iron Parts Produced by Lost-Foam Casting [Volume 24, Issue 1, 2012-2013]
P
-
Plain Carbon Steel
Desulfurization of Plain Carbon Steel by CaO-Al2O3-SiO2 and CaO-Al2O3-SiO2-X (X = Na2O, SrO) Synthetic Slags [Volume 24, Issue 2, 2012-2013]
-
Pulsed TIG Welding
Optimization of the Processing Parameters of Pulsed TIG Welding for the Enhancement of Mechanical Properties of Welds in AZ31 Magnesium Alloy [Volume 24, Issue 1, 2012-2013]
S
-
Semi Pre-alloyed steelsØ› Semi Pre-alloyed steels
A Study of Mechanical Properties and Fracture Mechanisms of Powder Metallurgy Parts Prepared using Semi Pre-alloyed Steels [Volume 24, Issue 2, 2012-2013]
-
Silicon Carbide (SiC)
The Effect of Fe2O3 on Microstructure and Mechanical Properties of Foam Glass Obtained from Soda-Lime Waste Glass and SiC as Foaming Agent [Volume 24, Issue 1, 2012-2013]
-
Silisic Acid
Control of Particle Size and Concentration of Colloidal Silica Formed via Cation Exchange Resin by Water Glass Solution [Volume 24, Issue 2, 2012-2013]
-
Sintering
Effects of Fabrication Parameters on Phase Composition, Densification and Mechanical Properties of Aluminum-Alumina Cermets [Volume 24, Issue 1, 2012-2013]
-
Sodium Silicate (water glass)
Control of Particle Size and Concentration of Colloidal Silica Formed via Cation Exchange Resin by Water Glass Solution [Volume 24, Issue 2, 2012-2013]
-
St14 steel
Numerical Evaluation of the Effect of Forming Velocity on Forming Limit Diagram (FLD) of St14 Steel using Bifurcation Theory and Comparison with Experimental Results [Volume 24, Issue 1, 2012-2013]
-
Steel Purification
Desulfurization of Plain Carbon Steel by CaO-Al2O3-SiO2 and CaO-Al2O3-SiO2-X (X = Na2O, SrO) Synthetic Slags [Volume 24, Issue 2, 2012-2013]
-
Surface oxidation
A Research on Surface Oxidation of Co67Fe4Cr7Si8B14 Amorphous Ribbon during Crystallization [Volume 24, Issue 2, 2012-2013]
-
Synthetic Slag
Desulfurization of Plain Carbon Steel by CaO-Al2O3-SiO2 and CaO-Al2O3-SiO2-X (X = Na2O, SrO) Synthetic Slags [Volume 24, Issue 2, 2012-2013]
T
-
Taguchi
An Investigation into the Effects of Controlling Parameters on Amorphous-Nanocrystalline Ni-P Coating using Taguchi Method and Evaluation of its Thermal Behaviour [Volume 24, Issue 2, 2012-2013]
-
Taguchi method
Optimization of the Processing Parameters of Pulsed TIG Welding for the Enhancement of Mechanical Properties of Welds in AZ31 Magnesium Alloy [Volume 24, Issue 1, 2012-2013]
-
Transparency
Influence of Heat Treatment on Crystallization and Transparency of Glass-Ceramics Containing Lithium-Mica Nanocrystals [Volume 24, Issue 2, 2012-2013]
Your query does not match with any item